Spray Stop

Provides a cost effect, flexible and IMO compliant solution to prevent the risk of spray out from pipe flanges. Quick and easy to apply.

Available in a retail pack of 25mm or 50mm width, 1m length.

Sizes:
35mm x 10m
50mm x 10m
100mm x 10m
140mm x 10m
250mm x 10m
500mm x 10m
Click here to read the Spray Stop Press Release
NB: This product is a preventative not a repair solution.

Leak Stop

For emergency or permanent repair, Leak Stop will repair a pipe leak in under thirty minutes and contain pressure up to 20 bar and temperatures up to 500°F.

Quick and easy to use on virtually any material, it is also suitable as corrosion protection and electrical insulation to 16,000 volts.

Click here to watch our application video

Sizes:
50mm x 1.5m
75mm x 2.7m

Leak Stop Patch

Fibreglass patch with two part epoxy resin. Sets in 5-15 minutes and supplied in an easy to use mixer pack. Fast repairs to virtually any material.

Patch size:
100mm x 150mm (Yellow)
100mm x 300mm (Red)

Hazard Floor Marking Tape

Self-adhesive PVC for marking floors. Yellow/Black & Red/White

Sizes:
50mm x 33m rolls

Heavy Duty Carpet Tape

An extra heavy duty, double sided carpet tape suitable for vinyl flooring.

Sizes:
50mm x 33m rolls

UV Duck Tape

UV resistant, hard wearing, self-adhesive cloth duck tape. Removes after use without leaving sticky residue.

Sizes:
50mm x 25m rolls
75mm x 25m rolls
100mm x 25m rolls
Click here to read the UV Duck Tape Press Release
Click here to watch our production video

Double Sided Foam Tape - 1mm thick

High performance double sided self-adhesive foam tape. Suitable for Exterior Use. Black and white available.

Sizes:
50mm x 50m rolls

Self-Adhesive Gripsure Tape

Self-adhesive Safety Route Marking Tape, with heavy duty non slip surface. The photoluminescent properties of this product will charge in natural or artificial light and glow for a short period of time in the dark to assist in guidance to an escape.
Also available in black and hazard (black and yellow) - Non glowing

Sizes:
50mm x 18m rolls
100mm x 18m rolls
150mm x 18m rolls

Glow Strip

Exterior grade self-adhesive route marking photoluminescent tape. Photoluminescent properties are designed to charge in natural or artificial light and provide a high intensity initial glow, after which it retains sufficient energy to be seen all night long. This product is designed to be applied to upright surfaces as an exit guidance system.
Also available with black hazard stripes.

Size: 50mm x 10m rolls
Click here to read the Glow Strip Press Release

Exit Tape

Interior application, self-adhesive route marking tape. Photoluminescent properties are designed to charge in natural or artificial light and provide a high intensity initial glow, after which it retains sufficient energy to be seen all night long, conforming to SOLAS regulations for Low Level Lighting.
Suitable for use as a Low Level Lighting System subject to installation to ISO 15370.
Available in plain or with exit arrows.

Size: 50mm x 10m rolls
Click here to read the Press Release

Polyurethane Floor Marking Strip

SOLAS APPROVED. A durable photoluminescent floor marking strip, with a high after glow internsity, 10 minutes - 200mcd/m2 and decay time in excess of 48 hours. With excellent UV and weather resistant properties, this flexible PU strip easily tackles irregular contours and provides a non-slip-surface.
Suitable for use as a Low Level Lighting System subject to installation to ISO 15370.
Available to apply with wet adhesive or pre laminated with double sided tape.

Size: 48mm, glow area 38mm width. In rolls of 10m.

Aluminium Stair Nosing Strips

Used to provide a guide to exit routes or identification or stairways in the dark. These hard waring aluminium strips 'cap stairway edges' either an exterior (glow strips) or interior (exit tapes) photoluminescent tape can be inserted into the stair nosing. Both photoluminescent tapes offer a high after glow intensity and can be seen all night long.
Available to apply with mechanical fixing, wet adhesive or double sided tape.

Size: 50mm x 20mm x 1.2m strips

Gripsure Non-Slip Stair Strips

Interior or exterior use, with anti slip surface for use on stair treads or to mark walkways. Slotted for wire attachment to mesh staircases, plain for fitting with wet adhesive or laminated with a self-adhesive foam tape.
Suitable for use as a Low Level Lighting System subject to installation to ISO 15370

Size: 60mm x 1m strips

Gripsure Non-Slip Stair Edge Pieces

A similar product to the above strips - L-shaped for marking the edge of the stairway on the stair tread and the vertical stair. Non-slip, pre laminated with self adhesive foam tape for ease of application.
Suitable for use as a Low Level Lighting System subject to installation to ISO 15370

Size: 50mm x 40mm x 200mm L-shaped pieces.

Photoluminescent Arrow Discs

Self adhesive, Aluminium backed, anti slip discs with a photoluminescent arrow used to mark and identify exit routes. This product can withstand traffic from forklift trucks.
Suitable for use as a Low Level Lighting System subject to installation to ISO 15370

Size: 90mm and 200mm diameters.

Pipe Identification Tapes

We can now offer a comprehensive range of Pipe i/d tapes. We have plates for every text and can print to order within a few days on standard interior grade with a clear over lamination film for protection or exterior UV RESISTANT quality.

Size: 50mm x 33m rolls other sizes available subject to requirements.